Contact
**I DO NOT SELL COMPLETE TREMOLO SYSTEMS!**
NOTE: To all the left handed players out there.
I can do lefty versions of every bar I make, so no worries about finding or paying extra just
because you're a lefty!
When ordering with a part number, please add G (Gold), GB (Gold brushed) or SS
(stainless), or SSB (Stainless Steel brushed).
Stainless Steel brushed finish for all bars unless you specify otherwise.
For example: If you'd like a Yamaha RM Pro bar in polished Stainless Steel to match chrome,
the part number would be: TB-RMPro-SS
YAMAHA Tremolo Bars
These are made from solid polished or brushed stainless steel or Brass.
A note about the brass bars.
They have a slight step that can be seen in the pic below because these are a metric bar size
and I have yet to find a good (dependable / reasonable) metric source for brass roundstock.
The step does not hurt a thing, and is hardly even noticeable but I just wanted you to be aware
of it.
TB-RMPro
$30.00
Fits the following 5 trems below:
RM-Pro,
RM Pro II
Vintage Pro
YAMAHA TRS Pro These are made from solid polished or brushed stainless steel
TB-TRS
$30.00
YAMAHA Rockin' Magic II These are made from solid polished or brushed stainless steel
TB-RMagII
$30.00
Fits the following trem below:
RM-Pro Tremolo Friction Collars
These are the perfect replacement for the Friction
Collars that seem to grow feet and walk away.
These are black anodized aluminum and will fit the
original RM-Pro (with Pop-in Bar).
Notice, I've removed the RM Pro II (only!)
from the list of tremolos that use this friction collar
because apparently, Yamaha had changed design
through production on these. If you'd like to take a shot
at ordering one, feel free, but I can not guarantee
that it will fit your RM Pro II Tremolo.
$25.00 Each
Black Anodized
Aluminum:
HWyfcr-1
RM-Pro Tremolo Bar Friction bushings
These are the Delrin bushing shown in the picture
below being pointed to by the black arrow.
Angled side faces down into the Tremolo bar socket.
$15.00 Each
HWyfb-1
Rockin'Magic II
Intonation Buttonhead Setting Screws
As found on most SE and Early RGX Models
I had some questions about why there are
saddle "rollers" on this bridge as it doesn't
look like other Rockin Magic bridges. The
reason is, I machined the slots and installed
rollers myself to allow better string movement.
Sorry about any confusion.
.45 cents each
HWYRM2IBSS
RM-Pro Tremolo
Intonation or Saddle/String Lockdown Screws
.45 cents each
HWYRMPSLS
Rockin'Magic String Lock Screws
As found on most SE and RGX Models
.50 cents each
HWyls-1
RM-Pro Tremolo Locknut Plates As found on
RM Pro, RM PROII, and RM ProIII, and also
SE and RGX Models
These are not originals, but are a perfect working
replacement for those lost Plates!
$15.00 Per Set of 3
Black Only
HWYLP-1
Same as above but with a set of
3 Locking Screws
(You’ll receive 3 Locking Plates and
3 Locking screws)
$17.00 Per Set
Black Only
HWYLP-2
Same as above but with an Allen Wrench
(You’ll receive 3 Locking Plates and
3 Locking screws)
$18.00 Per Set
Black Only
HWYLP-3
RM-Pro Tremolo Locknut Wrench As found on
RM Pro, RM PROII, and RM ProIII, and also
SE and RGX Models
$1.00 each
HWYLPWR
Finally, RM-Pro Tremolo Locknut Plates As found on RM Pro, RM PROII, and
RM ProIII, and also SE and RGX Models
Vintage Pro II
RM Pro III
RM-Pro II and RM-Pro III Tremolo
Friction Collars
These are the perfect replacement for the Friction
Collars that seem to grow feet and walk away.
These are black anodized aluminum and will fit
the original RM-Pro II (with Pop-in Bar).
$25.00 Each
Black Anodized
Aluminum
HWyfcr-3
RM-Pro II and RM-Pro III Tremolo Bar
Friction bushings
These are the Delrin bushing shown in the picture.
Angled side faces down into the Tremolo bar
socket. This is for the bushing only!
These replace the “crunchy” brass original
bushingsand these allow for smoother positioning
of the trem bar.
$15.00 Each
HWyfbII-1
Rockin'Magic II
String Clamp Lockdown Flathead Screws
As found on most SE and Early RGX Models
I had some questions about why there are
saddle "rollers" on this bridge as it doesn't
look like other Rockin Magic bridges. The
reason is, I machined the slots and installed
rollers myself to allow better string movement.
Sorry about any confusion.
.45 cents each
HWYRM2SLFS
RM-Pro II and RM-Pro III Tremolo Bar
Click Spring
This is the curled flat spring that installs with
two small screws. This is what holds/snaps in the
bar as it’s inserted into the bar socket.
$19.00 Each
HWYRMII-CS
Rockin'Magic II Trem Bar Set Screw
This is the screw that sits behind the trem bar
socket as shown in the picture. Tightening
this pushes on a little plastic bushings
(available soon!) that sugs the slop out of a
loose bar.
.50 cents each
HWYSE-TBSS